Simple Corner Gluing Aid — The Family Handyman
Simple Corner Gluing Aid
After gluing two joints, y'all'll take a U-shape formed by three frame members. Cut the quaternary frame fellow member a little oversized, examination-fit it and trim information technology for a perfect fit with a miter saw or disc sander.
- Cut out four vi-in. squares from 3/4-in. plywood.
- Use a jigsaw to cut i-in. broad notches at a 45-degree angle into one corner of each of the four squares. Yous'll use the notch to check the underside of the joint so you lot can wipe off squeezed-out glue before it hardens.
To employ, clench one mitered frame piece downwards tightly to the first square, utilise glue and press the second slice into place, snugging it upwardly tightly by hand so the glue oozes out along the articulation line. Suit until the joint aligns perfectly; then tighten the second clamp. Adjust, gum and clamp the second miter using another plywood square.
After gluing ii joints, yous'll have a U-shape formed by three frame members. Cut the quaternary frame fellow member a lilliputian oversized, exam-fit information technology and trim it for a perfect fit with a miter saw or disc sander. Glue it into the frame using the concluding two plywood squares. The out-of-the-way clamp positions allow you to drill airplane pilot holes and drive brads into each corner to reinforce the joint if you lot wish.
Originally Published: Dec xiii, 2017
Source: https://www.familyhandyman.com/article/simple-corner-gluing-aids/
0 Response to "Simple Corner Gluing Aid — The Family Handyman"
Post a Comment